!xselect 17:38:58 11-Apr-2007
 Command not found; type ? for a command listing
!xsel:SUZAKU > clear all
WARNING: CLEAR ALL will remove all temporary files
!> Proceed? (yes or no) >[yes] yes
#!/bin/sh
/bin/rm -f xsel_*work*.xsl
/bin/rm -f xsel_*mer*.xsl
/bin/rm -f xsel_*.xsl
/bin/rm -f xsel_*.def
/bin/rm -f xsel_*.tmp
exit 0
!xsel > set mission SUZAKU
#!/bin/sh
/bin/rm -f xsel_*work*.xsl
/bin/rm -f xsel_*mer*.xsl
/bin/rm -f xsel_*.xsl
/bin/rm -f xsel_*.def
/bin/rm -f xsel_*.tmp
exit 0
!xsel:SUZAKU > read event
!> Enter the Event file dir >[./] ./
!> Enter Event file list >[tmp2.evt] ae100020010xi0_1_3x3n000z_uf.evt ae100020010xi0_2_3x3n000z_uf.evt
remove =    0
datdir = /home/ozaki/tmp/mkNeDe/!
filenm = /home/ozaki/tmp/mkNeDe/ae100020010xi0_1_3x3n000z_uf.evt!
remove =    0
datdir = /home/ozaki/tmp/mkNeDe/!
filenm = /home/ozaki/tmp/mkNeDe/ae100020010xi0_2_3x3n000z_uf.evt!
 
 Notes: XSELECT set up for      SUZAKU
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
Setting...
 Image  keywords   = X          Y           with binning =    8
 WMAP   keywords   = X          Y           with binning =    8
 Energy keyword   = PI                     with binning =    1
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   8.0000
MJDREF =  5.1544000742870E+04 with TIMESYS = TT
 Number of files read in:  2
remove =    0
datdir = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/!
filenm = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_obslist.def!
remove =    0
datdir = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/!
filenm = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_sort.tmp!
#!/bin/sh
CMDNAME=ffilecat
ffilecat infile="@/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_obscat.tmp" outfile=/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_read_cat.xsl keywords="@/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_obslist.def" maxlen = 11 minlen = 0 aform = A11 iform = I8 eform = "E8.2" quiet = yes omit = no 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
CMDNAME=fmemsort
fmemsort infile=/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_read_cat.xsl outfile=/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_sort.tmp columns="DATE-OBS TIME-OBS" method="shell" ascend=yes load2mem=yes copyall=yes unique=no history=yes clobber=yes 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
CMDNAME=mv
mv -f /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_sort.tmp /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_read_cat.xsl 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  "infile=@/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_obscat.tmp" "outfile=/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_read_cat.xsl" "keywords=@/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_obslist.def" maxlen = 11 minlen = 0 aform = A11 iform = I8 eform = "E8.2" quiet = yes omit = no
  "infile=/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_read_cat.xsl" "outfile=/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_sort.tmp" "columns=DATE-OBS TIME-OBS" method=shell ascend=yes load2mem=yes copyall=yes unique=no history=yes clobber=yes
 
******************** Observation Catalogue ********************
 
Data Directory is: /home/ozaki/tmp/mkNeDe/
HK Directory is: /home/ozaki/tmp/mkNeDe/
#!/bin/sh
fdump /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_read_cat.xsl STDOUT @xsel_display.def - prhead = no pagewidth = 128 wrap = yes showunit = no tdisp = yes
  "/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_read_cat.xsl" STDOUT "@xsel_display.def" "-" prhead = no pagewidth = 128 wrap = yes showunit = no tdisp = yes
 
 
        OBJECT      DATE-OBS    TIME-OBS    DATE-END    TIME-END    EDITMODE
      1 Fornax Clus 2005-09-13T NOT_FOUND   2005-09-14T NOT_FOUND   3x3
      2 Fornax Clus 2005-09-13T NOT_FOUND   2005-09-14T NOT_FOUND   3x3
 
!xsel:SUZAKU-XIS0-STANDARD > filter column "GRADE=0:0 2:4 6:6 STATUS=0:262143"
!xsel:SUZAKU-XIS0-STANDARD > clear hk
!xsel:SUZAKU-XIS0-STANDARD > read hk
!> HK file directory >[./] ./
!> Enter HK file list >[ae100020010.hk.gz] ae100020010.ehk.gz
remove =    0
datdir = ./!
filenm = ./ae100020010.ehk.gz!
!> Are the HK files in expanded form? >[yes] yes
!xsel:SUZAKU-XIS0-STANDARD > select hk "SAA_HXD == 0 && T_SAA_HXD > 436 && ELV > -5 && NTE_ELV>100 && ANG_DIST < 1.5"
#!/bin/sh
CMDNAME=maketime
maketime infile=./ae100020010.ehk.gz outfile = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl expr = "SAA_HXD == 0 && T_SAA_HXD > 436 && ELV > -5 && NTE_ELV>100 && ANG_DIST < 1.5" name = NAME value = VALUE time = TIME start = START stop = STOP  compact = no histkw = yes 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  "infile=./ae100020010.ehk.gz" outfile = "/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl" expr = "SAA_HXD == 0 && T_SAA_HXD > 436 && ELV > -5 && NTE_ELV>100 && ANG_DIST < 1.5" name = NAME value = VALUE time = TIME start = START stop = STOP compact = no histkw = yes
PREFR keyword not found, using prefr = 0.5
POSTFR keyword not found, using postfr = 0.5
!xsel:SUZAKU-XIS0-STANDARD > bin event
#!/bin/sh
CMDNAME=extractor
extractor filename = "@xsel_files.tmp[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = xsel_out_event.xsl copyall=no regionfile = "NONE" qdpfile = NONE fitsbinlc = "NONE"  unbinlc = NONE phafile = NONE imgfile = NONE timefile = "@xsel_timefile.asc" gstring = "NONE" timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin =    1 binh =    8 binf =    8 binlc =  1.6000000E+01 tcol = TIME ecol = PI ccol = SEGMENT gcol = 		  GRADE gti = "STDGTI" events = "EVENTS" gtitxt = xsel_ascii_out.xsl timeref =   40000.00 wtmapb = yes wtmapfix = yes swmapx = no swmapy = no wmapver = 2 gtinam = "GTI" exitnow = no 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  filename = "@xsel_files.tmp[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = "xsel_out_event.xsl" copyall=no regionfile = NONE qdpfile = NONE fitsbinlc = NONE unbinlc = NONE phafile = NONE imgfile = NONE timefile = "@xsel_timefile.asc" gstring = NONE timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin = 1 binh = 8 binf = 8 binlc = "1.6000000E+01" tcol = TIME ecol = PI ccol = SEGMENT gcol = GRADE gti = STDGTI events = EVENTS gtitxt = "xsel_ascii_out.xsl" timeref = "40000.00" wtmapb = yes wtmapfix = yes swmapx = no swmapy = no wmapver = 2 gtinam = GTI exitnow = no
extractor v4.67     11 Jul 2006
 Getting FITS WCS Keywords
 Doing file: /home/ozaki/tmp/mkNeDe/ae100020010xi0_1_3x3n000z_uf.evt
          Total      Good    Bad: Region      Time     Phase     Grade     Cut
        1829398    140419              0   1196013         0         0    492966
 Writing events file
 140419 events written to the output file
 Doing file: /home/ozaki/tmp/mkNeDe/ae100020010xi0_2_3x3n000z_uf.evt
          Total      Good    Bad: Region      Time     Phase     Grade     Cut
         636143     37634              0    421009         0         0    177500
 Writing events file
 178053 events written to the output file
===============================================================================   Grand Total      Good   Bad:  Region      Time     Phase     Grade    Cut
       2465541    178053              0   1617022         0         0    670466   in  29295.     seconds
#!/bin/sh
CMDNAME=fmemsort
fmemsort  infile=xsel_out_event.xsl\[EVENTS\]  outfile=/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_temp.xsl  column=TIME  method=heap ascend=yes copyall=yes history=yes 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  "infile=xsel_out_event.xsl[EVENTS]" "outfile=/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_temp.xsl" column=TIME method=heap ascend=yes copyall=yes history=yes
!xsel:SUZAKU-XIS0-STANDARD > save event tmp1.evt clobber=yes
Wrote events list to file tmp1.evt
!> Use filtered events as input data file ? >[no] no
!xsel:SUZAKU-XIS0-STANDARD > clear data
#!/bin/sh
/bin/rm -f xsel_*work*.xsl
/bin/rm -f xsel_*mer*.xsl
exit 0
!xsel:SUZAKU-XIS0-STANDARD > read event tmp1.evt
remove =    0
datdir = /home/ozaki/tmp/mkNeDe/!
filenm = /home/ozaki/tmp/mkNeDe/tmp1.evt!
 
 Notes: XSELECT set up for      SUZAKU
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
Setting...
 Image  keywords   = X          Y           with binning =    8
 WMAP   keywords   = X          Y           with binning =    8
 Energy keyword   = PI                     with binning =    1
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   8.0000
MJDREF =  5.1544000742870E+04 with TIMESYS = TT
 Number of files read in:  1
remove =    0
datdir = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/!
filenm = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_obslist.def!
remove =    0
datdir = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/!
filenm = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_sort.tmp!
#!/bin/sh
CMDNAME=ffilecat
ffilecat infile="@/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_obscat.tmp" outfile=/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_read_cat.xsl keywords="@/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_obslist.def" maxlen = 11 minlen = 0 aform = A11 iform = I8 eform = "E8.2" quiet = yes omit = no 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
CMDNAME=fmemsort
fmemsort infile=/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_read_cat.xsl outfile=/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_sort.tmp columns="DATE-OBS TIME-OBS" method="shell" ascend=yes load2mem=yes copyall=yes unique=no history=yes clobber=yes 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
CMDNAME=mv
mv -f /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_sort.tmp /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_read_cat.xsl 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  "infile=@/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_obscat.tmp" "outfile=/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_read_cat.xsl" "keywords=@/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_obslist.def" maxlen = 11 minlen = 0 aform = A11 iform = I8 eform = "E8.2" quiet = yes omit = no
  "infile=/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_read_cat.xsl" "outfile=/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_sort.tmp" "columns=DATE-OBS TIME-OBS" method=shell ascend=yes load2mem=yes copyall=yes unique=no history=yes clobber=yes
 
******************** Observation Catalogue ********************
 
Data Directory is: /home/ozaki/tmp/mkNeDe/
HK Directory is: /home/ozaki/tmp/mkNeDe/
#!/bin/sh
fdump /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_read_cat.xsl STDOUT @xsel_display.def - prhead = no pagewidth = 128 wrap = yes showunit = no tdisp = yes
  "/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_read_cat.xsl" STDOUT "@xsel_display.def" "-" prhead = no pagewidth = 128 wrap = yes showunit = no tdisp = yes
 
 
        OBJECT      DATE-OBS    TIME-OBS    DATE-END    TIME-END    EDITMODE
      1 Fornax Clus 2005-09-13T NOT_FOUND   2005-09-14T NOT_FOUND   3x3
 
!xsel:SUZAKU-XIS0-STANDARD >
!xsel:SUZAKU-XIS0-STANDARD > clear hk
!xsel:SUZAKU-XIS0-STANDARD > read hk
!> HK file directory >[./] ./
!> Enter HK file list >[ae100020010.ehk.gz] ae100020010xi0_0.hk.gz
remove =    0
datdir = ./!
filenm = ./ae100020010xi0_0.hk.gz!
!> Are the HK files in expanded form? >[yes] yes
!xsel:SUZAKU-XIS0-STANDARD > select hk "S0_ADHST_A == 0 && S0_ADHST_B == 0 && S0_ADHST_C == 0 && S0_ADHST_D == 0"
#!/bin/sh
CMDNAME=maketime
maketime infile=./ae100020010xi0_0.hk.gz outfile = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl expr = "S0_ADHST_A == 0 && S0_ADHST_B == 0 && S0_ADHST_C == 0 && S0_ADHST_D == 0" name = NAME value = VALUE time = TIME start = START stop = STOP  compact = no histkw = yes 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  "infile=./ae100020010xi0_0.hk.gz" outfile = "/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl" expr = "S0_ADHST_A == 0 && S0_ADHST_B == 0 && S0_ADHST_C == 0 && S0_ADHST_D == 0" name = NAME value = VALUE time = TIME start = START stop = STOP compact = no histkw = yes
PREFR keyword not found, using prefr = 0.5
POSTFR keyword not found, using postfr = 0.5
maketime2.9 : Failed to parse expression
maketime2.9 : Error Status Returned :  202
maketime2.9 : keyword not found in header
 
maketime2.9 :  ***** FITSIO Error Stack Dump *****
ffgcnn could not find column: S0_ADHST_A
ffgkey could not find keyword: S0_ADHST_A
!xsel:SUZAKU-XIS0-STANDARD > bin event
#!/bin/sh
CMDNAME=extractor
extractor filename = "@xsel_files.tmp[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = xsel_out_event.xsl copyall=no regionfile = "NONE" qdpfile = NONE fitsbinlc = "NONE"  unbinlc = NONE phafile = NONE imgfile = NONE timefile = NONE gstring = "NONE" timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin =    1 binh =    8 binf =    8 binlc =  1.6000000E+01 tcol = TIME ecol = PI ccol = SEGMENT gcol = 		  GRADE gti = "STDGTI" events = "EVENTS" gtitxt = xsel_ascii_out.xsl timeref =   40000.00 wtmapb = yes wtmapfix = no wmapver = 2 gtinam = "GTI" exitnow = no 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  filename = "@xsel_files.tmp[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = "xsel_out_event.xsl" copyall=no regionfile = NONE qdpfile = NONE fitsbinlc = NONE unbinlc = NONE phafile = NONE imgfile = NONE timefile = NONE gstring = NONE timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin = 1 binh = 8 binf = 8 binlc = "1.6000000E+01" tcol = TIME ecol = PI ccol = SEGMENT gcol = GRADE gti = STDGTI events = EVENTS gtitxt = "xsel_ascii_out.xsl" timeref = "40000.00" wtmapb = yes wtmapfix = no wmapver = 2 gtinam = GTI exitnow = no
extractor v4.67     11 Jul 2006
 Getting FITS WCS Keywords
 Doing file: /home/ozaki/tmp/mkNeDe/tmp1.evt
          Total      Good    Bad: Region      Time     Phase     Grade     Cut
         178053    178053              0         0         0         0         0
 Writing events file
 178053 events written to the output file
===============================================================================   Grand Total      Good   Bad:  Region      Time     Phase     Grade    Cut
        178053    178053              0         0         0         0         0   in  29295.     seconds
!xsel:SUZAKU-XIS0-STANDARD > select hk "S0_ADHEND_A == 255 && S0_ADHEND_B == 255 && S0_ADHEND_C == 255 && S0_ADHEND_D == 255"
#!/bin/sh
CMDNAME=maketime
maketime infile=./ae100020010xi0_0.hk.gz outfile = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl expr = "S0_ADHEND_A == 255 && S0_ADHEND_B == 255 && S0_ADHEND_C == 255 && S0_ADHEND_D == 255" name = NAME value = VALUE time = TIME start = START stop = STOP  compact = no histkw = yes 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  "infile=./ae100020010xi0_0.hk.gz" outfile = "/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl" expr = "S0_ADHEND_A == 255 && S0_ADHEND_B == 255 && S0_ADHEND_C == 255 && S0_ADHEND_D == 255" name = NAME value = VALUE time = TIME start = START stop = STOP compact = no histkw = yes
PREFR keyword not found, using prefr = 0.5
POSTFR keyword not found, using postfr = 0.5
maketime2.9 : Failed to parse expression
maketime2.9 : Error Status Returned :  202
maketime2.9 : keyword not found in header
 
maketime2.9 :  ***** FITSIO Error Stack Dump *****
ffgcnn could not find column: S0_ADHEND_A
ffgkey could not find keyword: S0_ADHEND_A
!xsel:SUZAKU-XIS0-STANDARD > bin event
#!/bin/sh
CMDNAME=extractor
extractor filename = "xsel_work2001.xsl[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = xsel_out_event.xsl copyall=no regionfile = "NONE" qdpfile = NONE fitsbinlc = "NONE"  unbinlc = NONE phafile = NONE imgfile = NONE timefile = NONE gstring = "NONE" timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin =    1 binh =    8 binf =    8 binlc =  1.6000000E+01 tcol = TIME ecol = PI ccol = SEGMENT gcol = 		  GRADE gti = "STDGTI" events = "EVENTS" gtitxt = xsel_ascii_out.xsl timeref =   40000.00 wtmapb = yes wtmapfix = no wmapver = 2 gtinam = "GTI" exitnow = no 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  filename = "xsel_work2001.xsl[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = "xsel_out_event.xsl" copyall=no regionfile = NONE qdpfile = NONE fitsbinlc = NONE unbinlc = NONE phafile = NONE imgfile = NONE timefile = NONE gstring = NONE timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin = 1 binh = 8 binf = 8 binlc = "1.6000000E+01" tcol = TIME ecol = PI ccol = SEGMENT gcol = GRADE gti = STDGTI events = EVENTS gtitxt = "xsel_ascii_out.xsl" timeref = "40000.00" wtmapb = yes wtmapfix = no wmapver = 2 gtinam = GTI exitnow = no
extractor v4.67     11 Jul 2006
 Getting FITS WCS Keywords
 Doing file: xsel_work2001.xsl
          Total      Good    Bad: Region      Time     Phase     Grade     Cut
         178053    178053              0         0         0         0         0
 Writing events file
 178053 events written to the output file
===============================================================================   Grand Total      Good   Bad:  Region      Time     Phase     Grade    Cut
        178053    178053              0         0         0         0         0   in  29295.     seconds
!xsel:SUZAKU-XIS0-STANDARD > select hk "S0_ADVST_A == 0 && S0_ADVST_B == 0 && S0_ADVST_C == 0 && S0_ADVST_D == 0 && S0_ADVEND_A == 1023"
#!/bin/sh
CMDNAME=maketime
maketime infile=./ae100020010xi0_0.hk.gz outfile = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl expr = "S0_ADVST_A == 0 && S0_ADVST_B == 0 && S0_ADVST_C == 0 && S0_ADVST_D == 0 && S0_ADVEND_A == 1023" name = NAME value = VALUE time = TIME start = START stop = STOP  compact = no histkw = yes 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  "infile=./ae100020010xi0_0.hk.gz" outfile = "/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl" expr = "S0_ADVST_A == 0 && S0_ADVST_B == 0 && S0_ADVST_C == 0 && S0_ADVST_D == 0 && S0_ADVEND_A == 1023" name = NAME value = VALUE time = TIME start = START stop = STOP compact = no histkw = yes
PREFR keyword not found, using prefr = 0.5
POSTFR keyword not found, using postfr = 0.5
maketime2.9 : Failed to parse expression
maketime2.9 : Error Status Returned :  202
maketime2.9 : keyword not found in header
 
maketime2.9 :  ***** FITSIO Error Stack Dump *****
ffgcnn could not find column: S0_ADVST_A
ffgkey could not find keyword: S0_ADVST_A
!xsel:SUZAKU-XIS0-STANDARD > bin event
#!/bin/sh
CMDNAME=extractor
extractor filename = "xsel_work2001.xsl[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = xsel_out_event.xsl copyall=no regionfile = "NONE" qdpfile = NONE fitsbinlc = "NONE"  unbinlc = NONE phafile = NONE imgfile = NONE timefile = NONE gstring = "NONE" timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin =    1 binh =    8 binf =    8 binlc =  1.6000000E+01 tcol = TIME ecol = PI ccol = SEGMENT gcol = 		  GRADE gti = "STDGTI" events = "EVENTS" gtitxt = xsel_ascii_out.xsl timeref =   40000.00 wtmapb = yes wtmapfix = no wmapver = 2 gtinam = "GTI" exitnow = no 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  filename = "xsel_work2001.xsl[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = "xsel_out_event.xsl" copyall=no regionfile = NONE qdpfile = NONE fitsbinlc = NONE unbinlc = NONE phafile = NONE imgfile = NONE timefile = NONE gstring = NONE timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin = 1 binh = 8 binf = 8 binlc = "1.6000000E+01" tcol = TIME ecol = PI ccol = SEGMENT gcol = GRADE gti = STDGTI events = EVENTS gtitxt = "xsel_ascii_out.xsl" timeref = "40000.00" wtmapb = yes wtmapfix = no wmapver = 2 gtinam = GTI exitnow = no
extractor v4.67     11 Jul 2006
 Getting FITS WCS Keywords
 Doing file: xsel_work2001.xsl
          Total      Good    Bad: Region      Time     Phase     Grade     Cut
         178053    178053              0         0         0         0         0
 Writing events file
 178053 events written to the output file
===============================================================================   Grand Total      Good   Bad:  Region      Time     Phase     Grade    Cut
        178053    178053              0         0         0         0         0   in  29295.     seconds
!xsel:SUZAKU-XIS0-STANDARD > select hk "S0_ADVEND_B == 1023 && S0_ADVEND_C == 1023 && S0_ADVEND_D == 1023 && S0_DSC_INOUT_A == 0"
#!/bin/sh
CMDNAME=maketime
maketime infile=./ae100020010xi0_0.hk.gz outfile = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl expr = "S0_ADVEND_B == 1023 && S0_ADVEND_C == 1023 && S0_ADVEND_D == 1023 && S0_DSC_INOUT_A == 0" name = NAME value = VALUE time = TIME start = START stop = STOP  compact = no histkw = yes 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  "infile=./ae100020010xi0_0.hk.gz" outfile = "/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl" expr = "S0_ADVEND_B == 1023 && S0_ADVEND_C == 1023 && S0_ADVEND_D == 1023 && S0_DSC_INOUT_A == 0" name = NAME value = VALUE time = TIME start = START stop = STOP compact = no histkw = yes
PREFR keyword not found, using prefr = 0.5
POSTFR keyword not found, using postfr = 0.5
maketime2.9 : Failed to parse expression
maketime2.9 : Error Status Returned :  202
maketime2.9 : keyword not found in header
 
maketime2.9 :  ***** FITSIO Error Stack Dump *****
ffgcnn could not find column: S0_ADVEND_B
ffgkey could not find keyword: S0_ADVEND_B
!xsel:SUZAKU-XIS0-STANDARD > bin event
#!/bin/sh
CMDNAME=extractor
extractor filename = "xsel_work2001.xsl[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = xsel_out_event.xsl copyall=no regionfile = "NONE" qdpfile = NONE fitsbinlc = "NONE"  unbinlc = NONE phafile = NONE imgfile = NONE timefile = NONE gstring = "NONE" timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin =    1 binh =    8 binf =    8 binlc =  1.6000000E+01 tcol = TIME ecol = PI ccol = SEGMENT gcol = 		  GRADE gti = "STDGTI" events = "EVENTS" gtitxt = xsel_ascii_out.xsl timeref =   40000.00 wtmapb = yes wtmapfix = no wmapver = 2 gtinam = "GTI" exitnow = no 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  filename = "xsel_work2001.xsl[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = "xsel_out_event.xsl" copyall=no regionfile = NONE qdpfile = NONE fitsbinlc = NONE unbinlc = NONE phafile = NONE imgfile = NONE timefile = NONE gstring = NONE timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin = 1 binh = 8 binf = 8 binlc = "1.6000000E+01" tcol = TIME ecol = PI ccol = SEGMENT gcol = GRADE gti = STDGTI events = EVENTS gtitxt = "xsel_ascii_out.xsl" timeref = "40000.00" wtmapb = yes wtmapfix = no wmapver = 2 gtinam = GTI exitnow = no
extractor v4.67     11 Jul 2006
 Getting FITS WCS Keywords
 Doing file: xsel_work2001.xsl
          Total      Good    Bad: Region      Time     Phase     Grade     Cut
         178053    178053              0         0         0         0         0
 Writing events file
 178053 events written to the output file
===============================================================================   Grand Total      Good   Bad:  Region      Time     Phase     Grade    Cut
        178053    178053              0         0         0         0         0   in  29295.     seconds
!xsel:SUZAKU-XIS0-STANDARD > select hk "S0_DSC_INOUT_B == 0 && S0_DSC_INOUT_C == 0 && S0_DSC_INOUT_D == 0 && S0_GDSC_OTHERS == 1"
#!/bin/sh
CMDNAME=maketime
maketime infile=./ae100020010xi0_0.hk.gz outfile = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl expr = "S0_DSC_INOUT_B == 0 && S0_DSC_INOUT_C == 0 && S0_DSC_INOUT_D == 0 && S0_GDSC_OTHERS == 1" name = NAME value = VALUE time = TIME start = START stop = STOP  compact = no histkw = yes 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  "infile=./ae100020010xi0_0.hk.gz" outfile = "/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl" expr = "S0_DSC_INOUT_B == 0 && S0_DSC_INOUT_C == 0 && S0_DSC_INOUT_D == 0 && S0_GDSC_OTHERS == 1" name = NAME value = VALUE time = TIME start = START stop = STOP compact = no histkw = yes
PREFR keyword not found, using prefr = 0.5
POSTFR keyword not found, using postfr = 0.5
maketime2.9 : Failed to parse expression
maketime2.9 : Error Status Returned :  202
maketime2.9 : keyword not found in header
 
maketime2.9 :  ***** FITSIO Error Stack Dump *****
ffgcnn could not find column: S0_DSC_INOUT_B
ffgkey could not find keyword: S0_DSC_INOUT_B
!xsel:SUZAKU-XIS0-STANDARD > bin event
#!/bin/sh
CMDNAME=extractor
extractor filename = "xsel_work2001.xsl[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = xsel_out_event.xsl copyall=no regionfile = "NONE" qdpfile = NONE fitsbinlc = "NONE"  unbinlc = NONE phafile = NONE imgfile = NONE timefile = NONE gstring = "NONE" timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin =    1 binh =    8 binf =    8 binlc =  1.6000000E+01 tcol = TIME ecol = PI ccol = SEGMENT gcol = 		  GRADE gti = "STDGTI" events = "EVENTS" gtitxt = xsel_ascii_out.xsl timeref =   40000.00 wtmapb = yes wtmapfix = no wmapver = 2 gtinam = "GTI" exitnow = no 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  filename = "xsel_work2001.xsl[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = "xsel_out_event.xsl" copyall=no regionfile = NONE qdpfile = NONE fitsbinlc = NONE unbinlc = NONE phafile = NONE imgfile = NONE timefile = NONE gstring = NONE timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin = 1 binh = 8 binf = 8 binlc = "1.6000000E+01" tcol = TIME ecol = PI ccol = SEGMENT gcol = GRADE gti = STDGTI events = EVENTS gtitxt = "xsel_ascii_out.xsl" timeref = "40000.00" wtmapb = yes wtmapfix = no wmapver = 2 gtinam = GTI exitnow = no
extractor v4.67     11 Jul 2006
 Getting FITS WCS Keywords
 Doing file: xsel_work2001.xsl
          Total      Good    Bad: Region      Time     Phase     Grade     Cut
         178053    178053              0         0         0         0         0
 Writing events file
 178053 events written to the output file
===============================================================================   Grand Total      Good   Bad:  Region      Time     Phase     Grade    Cut
        178053    178053              0         0         0         0         0   in  29295.     seconds
!xsel:SUZAKU-XIS0-STANDARD > select hk "S0_GDSC_TRAIL_SP == 1 && S0_GDSC_LEAD_SP == 1 && S0_GDSC_SINGLE == 1 && S0_EVTHLW_A == 100"
#!/bin/sh
CMDNAME=maketime
maketime infile=./ae100020010xi0_0.hk.gz outfile = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl expr = "S0_GDSC_TRAIL_SP == 1 && S0_GDSC_LEAD_SP == 1 && S0_GDSC_SINGLE == 1 && S0_EVTHLW_A == 100" name = NAME value = VALUE time = TIME start = START stop = STOP  compact = no histkw = yes 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  "infile=./ae100020010xi0_0.hk.gz" outfile = "/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl" expr = "S0_GDSC_TRAIL_SP == 1 && S0_GDSC_LEAD_SP == 1 && S0_GDSC_SINGLE == 1 && S0_EVTHLW_A == 100" name = NAME value = VALUE time = TIME start = START stop = STOP compact = no histkw = yes
PREFR keyword not found, using prefr = 0.5
POSTFR keyword not found, using postfr = 0.5
maketime2.9 : Failed to parse expression
maketime2.9 : Error Status Returned :  202
maketime2.9 : keyword not found in header
 
maketime2.9 :  ***** FITSIO Error Stack Dump *****
ffgcnn could not find column: S0_GDSC_TRAIL_SP
ffgkey could not find keyword: S0_GDSC_TRAIL_SP
!xsel:SUZAKU-XIS0-STANDARD > bin event
#!/bin/sh
CMDNAME=extractor
extractor filename = "xsel_work2001.xsl[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = xsel_out_event.xsl copyall=no regionfile = "NONE" qdpfile = NONE fitsbinlc = "NONE"  unbinlc = NONE phafile = NONE imgfile = NONE timefile = NONE gstring = "NONE" timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin =    1 binh =    8 binf =    8 binlc =  1.6000000E+01 tcol = TIME ecol = PI ccol = SEGMENT gcol = 		  GRADE gti = "STDGTI" events = "EVENTS" gtitxt = xsel_ascii_out.xsl timeref =   40000.00 wtmapb = yes wtmapfix = no wmapver = 2 gtinam = "GTI" exitnow = no 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  filename = "xsel_work2001.xsl[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = "xsel_out_event.xsl" copyall=no regionfile = NONE qdpfile = NONE fitsbinlc = NONE unbinlc = NONE phafile = NONE imgfile = NONE timefile = NONE gstring = NONE timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin = 1 binh = 8 binf = 8 binlc = "1.6000000E+01" tcol = TIME ecol = PI ccol = SEGMENT gcol = GRADE gti = STDGTI events = EVENTS gtitxt = "xsel_ascii_out.xsl" timeref = "40000.00" wtmapb = yes wtmapfix = no wmapver = 2 gtinam = GTI exitnow = no
extractor v4.67     11 Jul 2006
 Getting FITS WCS Keywords
 Doing file: xsel_work2001.xsl
          Total      Good    Bad: Region      Time     Phase     Grade     Cut
         178053    178053              0         0         0         0         0
 Writing events file
 178053 events written to the output file
===============================================================================   Grand Total      Good   Bad:  Region      Time     Phase     Grade    Cut
        178053    178053              0         0         0         0         0   in  29295.     seconds
!xsel:SUZAKU-XIS0-STANDARD > select hk "S0_EVTHLW_B == 100 && S0_EVTHLW_C == 100 && S0_EVTHLW_D == 100 && S0_EVTHUP_A == 3583"
#!/bin/sh
CMDNAME=maketime
maketime infile=./ae100020010xi0_0.hk.gz outfile = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl expr = "S0_EVTHLW_B == 100 && S0_EVTHLW_C == 100 && S0_EVTHLW_D == 100 && S0_EVTHUP_A == 3583" name = NAME value = VALUE time = TIME start = START stop = STOP  compact = no histkw = yes 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  "infile=./ae100020010xi0_0.hk.gz" outfile = "/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl" expr = "S0_EVTHLW_B == 100 && S0_EVTHLW_C == 100 && S0_EVTHLW_D == 100 && S0_EVTHUP_A == 3583" name = NAME value = VALUE time = TIME start = START stop = STOP compact = no histkw = yes
PREFR keyword not found, using prefr = 0.5
POSTFR keyword not found, using postfr = 0.5
maketime2.9 : Failed to parse expression
maketime2.9 : Error Status Returned :  202
maketime2.9 : keyword not found in header
 
maketime2.9 :  ***** FITSIO Error Stack Dump *****
ffgcnn could not find column: S0_EVTHLW_B
ffgkey could not find keyword: S0_EVTHLW_B
!xsel:SUZAKU-XIS0-STANDARD > bin event
#!/bin/sh
CMDNAME=extractor
extractor filename = "xsel_work2001.xsl[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = xsel_out_event.xsl copyall=no regionfile = "NONE" qdpfile = NONE fitsbinlc = "NONE"  unbinlc = NONE phafile = NONE imgfile = NONE timefile = NONE gstring = "NONE" timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin =    1 binh =    8 binf =    8 binlc =  1.6000000E+01 tcol = TIME ecol = PI ccol = SEGMENT gcol = 		  GRADE gti = "STDGTI" events = "EVENTS" gtitxt = xsel_ascii_out.xsl timeref =   40000.00 wtmapb = yes wtmapfix = no wmapver = 2 gtinam = "GTI" exitnow = no 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  filename = "xsel_work2001.xsl[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = "xsel_out_event.xsl" copyall=no regionfile = NONE qdpfile = NONE fitsbinlc = NONE unbinlc = NONE phafile = NONE imgfile = NONE timefile = NONE gstring = NONE timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin = 1 binh = 8 binf = 8 binlc = "1.6000000E+01" tcol = TIME ecol = PI ccol = SEGMENT gcol = GRADE gti = STDGTI events = EVENTS gtitxt = "xsel_ascii_out.xsl" timeref = "40000.00" wtmapb = yes wtmapfix = no wmapver = 2 gtinam = GTI exitnow = no
extractor v4.67     11 Jul 2006
 Getting FITS WCS Keywords
 Doing file: xsel_work2001.xsl
          Total      Good    Bad: Region      Time     Phase     Grade     Cut
         178053    178053              0         0         0         0         0
 Writing events file
 178053 events written to the output file
===============================================================================   Grand Total      Good   Bad:  Region      Time     Phase     Grade    Cut
        178053    178053              0         0         0         0         0   in  29295.     seconds
!xsel:SUZAKU-XIS0-STANDARD > select hk "S0_EVTHUP_B == 3583 && S0_EVTHUP_C == 3583 && S0_EVTHUP_D == 3583 && S0_AREA_DSC_A == 0"
#!/bin/sh
CMDNAME=maketime
maketime infile=./ae100020010xi0_0.hk.gz outfile = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl expr = "S0_EVTHUP_B == 3583 && S0_EVTHUP_C == 3583 && S0_EVTHUP_D == 3583 && S0_AREA_DSC_A == 0" name = NAME value = VALUE time = TIME start = START stop = STOP  compact = no histkw = yes 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  "infile=./ae100020010xi0_0.hk.gz" outfile = "/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl" expr = "S0_EVTHUP_B == 3583 && S0_EVTHUP_C == 3583 && S0_EVTHUP_D == 3583 && S0_AREA_DSC_A == 0" name = NAME value = VALUE time = TIME start = START stop = STOP compact = no histkw = yes
PREFR keyword not found, using prefr = 0.5
POSTFR keyword not found, using postfr = 0.5
maketime2.9 : Failed to parse expression
maketime2.9 : Error Status Returned :  202
maketime2.9 : keyword not found in header
 
maketime2.9 :  ***** FITSIO Error Stack Dump *****
ffgcnn could not find column: S0_EVTHUP_B
ffgkey could not find keyword: S0_EVTHUP_B
!xsel:SUZAKU-XIS0-STANDARD > bin event
#!/bin/sh
CMDNAME=extractor
extractor filename = "xsel_work2001.xsl[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = xsel_out_event.xsl copyall=no regionfile = "NONE" qdpfile = NONE fitsbinlc = "NONE"  unbinlc = NONE phafile = NONE imgfile = NONE timefile = NONE gstring = "NONE" timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin =    1 binh =    8 binf =    8 binlc =  1.6000000E+01 tcol = TIME ecol = PI ccol = SEGMENT gcol = 		  GRADE gti = "STDGTI" events = "EVENTS" gtitxt = xsel_ascii_out.xsl timeref =   40000.00 wtmapb = yes wtmapfix = no wmapver = 2 gtinam = "GTI" exitnow = no 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  filename = "xsel_work2001.xsl[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = "xsel_out_event.xsl" copyall=no regionfile = NONE qdpfile = NONE fitsbinlc = NONE unbinlc = NONE phafile = NONE imgfile = NONE timefile = NONE gstring = NONE timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin = 1 binh = 8 binf = 8 binlc = "1.6000000E+01" tcol = TIME ecol = PI ccol = SEGMENT gcol = GRADE gti = STDGTI events = EVENTS gtitxt = "xsel_ascii_out.xsl" timeref = "40000.00" wtmapb = yes wtmapfix = no wmapver = 2 gtinam = GTI exitnow = no
extractor v4.67     11 Jul 2006
 Getting FITS WCS Keywords
 Doing file: xsel_work2001.xsl
          Total      Good    Bad: Region      Time     Phase     Grade     Cut
         178053    178053              0         0         0         0         0
 Writing events file
 178053 events written to the output file
===============================================================================   Grand Total      Good   Bad:  Region      Time     Phase     Grade    Cut
        178053    178053              0         0         0         0         0   in  29295.     seconds
!xsel:SUZAKU-XIS0-STANDARD > select hk "S0_AREA_DSC_B == 0 && S0_AREA_DSC_C == 0 && S0_AREA_DSC_D == 0 && S0_GRADE_DSC_A == 0"
#!/bin/sh
CMDNAME=maketime
maketime infile=./ae100020010xi0_0.hk.gz outfile = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl expr = "S0_AREA_DSC_B == 0 && S0_AREA_DSC_C == 0 && S0_AREA_DSC_D == 0 && S0_GRADE_DSC_A == 0" name = NAME value = VALUE time = TIME start = START stop = STOP  compact = no histkw = yes 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  "infile=./ae100020010xi0_0.hk.gz" outfile = "/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl" expr = "S0_AREA_DSC_B == 0 && S0_AREA_DSC_C == 0 && S0_AREA_DSC_D == 0 && S0_GRADE_DSC_A == 0" name = NAME value = VALUE time = TIME start = START stop = STOP compact = no histkw = yes
PREFR keyword not found, using prefr = 0.5
POSTFR keyword not found, using postfr = 0.5
maketime2.9 : Failed to parse expression
maketime2.9 : Error Status Returned :  202
maketime2.9 : keyword not found in header
 
maketime2.9 :  ***** FITSIO Error Stack Dump *****
ffgcnn could not find column: S0_AREA_DSC_B
ffgkey could not find keyword: S0_AREA_DSC_B
!xsel:SUZAKU-XIS0-STANDARD > bin event
#!/bin/sh
CMDNAME=extractor
extractor filename = "xsel_work2001.xsl[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = xsel_out_event.xsl copyall=no regionfile = "NONE" qdpfile = NONE fitsbinlc = "NONE"  unbinlc = NONE phafile = NONE imgfile = NONE timefile = NONE gstring = "NONE" timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin =    1 binh =    8 binf =    8 binlc =  1.6000000E+01 tcol = TIME ecol = PI ccol = SEGMENT gcol = 		  GRADE gti = "STDGTI" events = "EVENTS" gtitxt = xsel_ascii_out.xsl timeref =   40000.00 wtmapb = yes wtmapfix = no wmapver = 2 gtinam = "GTI" exitnow = no 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  filename = "xsel_work2001.xsl[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = "xsel_out_event.xsl" copyall=no regionfile = NONE qdpfile = NONE fitsbinlc = NONE unbinlc = NONE phafile = NONE imgfile = NONE timefile = NONE gstring = NONE timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin = 1 binh = 8 binf = 8 binlc = "1.6000000E+01" tcol = TIME ecol = PI ccol = SEGMENT gcol = GRADE gti = STDGTI events = EVENTS gtitxt = "xsel_ascii_out.xsl" timeref = "40000.00" wtmapb = yes wtmapfix = no wmapver = 2 gtinam = GTI exitnow = no
extractor v4.67     11 Jul 2006
 Getting FITS WCS Keywords
 Doing file: xsel_work2001.xsl
          Total      Good    Bad: Region      Time     Phase     Grade     Cut
         178053    178053              0         0         0         0         0
 Writing events file
 178053 events written to the output file
===============================================================================   Grand Total      Good   Bad:  Region      Time     Phase     Grade    Cut
        178053    178053              0         0         0         0         0   in  29295.     seconds
!xsel:SUZAKU-XIS0-STANDARD > select hk "S0_GRADE_DSC_B == 0 && S0_GRADE_DSC_C == 0 && S0_GRADE_DSC_D == 0"
#!/bin/sh
CMDNAME=maketime
maketime infile=./ae100020010xi0_0.hk.gz outfile = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl expr = "S0_GRADE_DSC_B == 0 && S0_GRADE_DSC_C == 0 && S0_GRADE_DSC_D == 0" name = NAME value = VALUE time = TIME start = START stop = STOP  compact = no histkw = yes 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  "infile=./ae100020010xi0_0.hk.gz" outfile = "/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl" expr = "S0_GRADE_DSC_B == 0 && S0_GRADE_DSC_C == 0 && S0_GRADE_DSC_D == 0" name = NAME value = VALUE time = TIME start = START stop = STOP compact = no histkw = yes
PREFR keyword not found, using prefr = 0.5
POSTFR keyword not found, using postfr = 0.5
maketime2.9 : Failed to parse expression
maketime2.9 : Error Status Returned :  202
maketime2.9 : keyword not found in header
 
maketime2.9 :  ***** FITSIO Error Stack Dump *****
ffgcnn could not find column: S0_GRADE_DSC_B
ffgkey could not find keyword: S0_GRADE_DSC_B
!xsel:SUZAKU-XIS0-STANDARD > bin event
#!/bin/sh
CMDNAME=extractor
extractor filename = "xsel_work2001.xsl[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = xsel_out_event.xsl copyall=no regionfile = "NONE" qdpfile = NONE fitsbinlc = "NONE"  unbinlc = NONE phafile = NONE imgfile = NONE timefile = NONE gstring = "NONE" timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin =    1 binh =    8 binf =    8 binlc =  1.6000000E+01 tcol = TIME ecol = PI ccol = SEGMENT gcol = 		  GRADE gti = "STDGTI" events = "EVENTS" gtitxt = xsel_ascii_out.xsl timeref =   40000.00 wtmapb = yes wtmapfix = no wmapver = 2 gtinam = "GTI" exitnow = no 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  filename = "xsel_work2001.xsl[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = "xsel_out_event.xsl" copyall=no regionfile = NONE qdpfile = NONE fitsbinlc = NONE unbinlc = NONE phafile = NONE imgfile = NONE timefile = NONE gstring = NONE timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin = 1 binh = 8 binf = 8 binlc = "1.6000000E+01" tcol = TIME ecol = PI ccol = SEGMENT gcol = GRADE gti = STDGTI events = EVENTS gtitxt = "xsel_ascii_out.xsl" timeref = "40000.00" wtmapb = yes wtmapfix = no wmapver = 2 gtinam = GTI exitnow = no
extractor v4.67     11 Jul 2006
 Getting FITS WCS Keywords
 Doing file: xsel_work2001.xsl
          Total      Good    Bad: Region      Time     Phase     Grade     Cut
         178053    178053              0         0         0         0         0
 Writing events file
 178053 events written to the output file
===============================================================================   Grand Total      Good   Bad:  Region      Time     Phase     Grade    Cut
        178053    178053              0         0         0         0         0   in  29295.     seconds
!xsel:SUZAKU-XIS0-STANDARD > select hk "S0_DTRATE < 3"
#!/bin/sh
CMDNAME=maketime
maketime infile=./ae100020010xi0_0.hk.gz outfile = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl expr = "S0_DTRATE < 3" name = NAME value = VALUE time = TIME start = START stop = STOP  compact = no histkw = yes 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  "infile=./ae100020010xi0_0.hk.gz" outfile = "/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl" expr = "S0_DTRATE < 3" name = NAME value = VALUE time = TIME start = START stop = STOP compact = no histkw = yes
PREFR keyword not found, using prefr = 0.5
POSTFR keyword not found, using postfr = 0.5
!xsel:SUZAKU-XIS0-STANDARD > bin event
#!/bin/sh
CMDNAME=extractor
extractor filename = "xsel_work2001.xsl[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = xsel_out_event.xsl copyall=no regionfile = "NONE" qdpfile = NONE fitsbinlc = "NONE"  unbinlc = NONE phafile = NONE imgfile = NONE timefile = "@xsel_timefile.asc" gstring = "NONE" timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin =    1 binh =    8 binf =    8 binlc =  1.6000000E+01 tcol = TIME ecol = PI ccol = SEGMENT gcol = 		  GRADE gti = "STDGTI" events = "EVENTS" gtitxt = xsel_ascii_out.xsl timeref =   40000.00 wtmapb = yes wtmapfix = no wmapver = 2 gtinam = "GTI" exitnow = no 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  filename = "xsel_work2001.xsl[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = "xsel_out_event.xsl" copyall=no regionfile = NONE qdpfile = NONE fitsbinlc = NONE unbinlc = NONE phafile = NONE imgfile = NONE timefile = "@xsel_timefile.asc" gstring = NONE timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin = 1 binh = 8 binf = 8 binlc = "1.6000000E+01" tcol = TIME ecol = PI ccol = SEGMENT gcol = GRADE gti = STDGTI events = EVENTS gtitxt = "xsel_ascii_out.xsl" timeref = "40000.00" wtmapb = yes wtmapfix = no wmapver = 2 gtinam = GTI exitnow = no
extractor v4.67     11 Jul 2006
 Getting FITS WCS Keywords
 Doing file: xsel_work2001.xsl
          Total      Good    Bad: Region      Time     Phase     Grade     Cut
         178053    176201              0      1852         0         0         0
 Writing events file
 176201 events written to the output file
===============================================================================   Grand Total      Good   Bad:  Region      Time     Phase     Grade    Cut
        178053    176201              0      1852         0         0         0   in  28587.     seconds
!xsel:SUZAKU-XIS0-STANDARD > save event tmp2.evt clobber=yes
Wrote events list to file tmp2.evt
!> Use filtered events as input data file ? >[no] no
!xsel:SUZAKU-XIS0-STANDARD > clear data
#!/bin/sh
/bin/rm -f xsel_*work*.xsl
/bin/rm -f xsel_*mer*.xsl
exit 0
!xsel:SUZAKU-XIS0-STANDARD > read event tmp2.evt
remove =    0
datdir = /home/ozaki/tmp/mkNeDe/!
filenm = /home/ozaki/tmp/mkNeDe/tmp2.evt!
 
 Notes: XSELECT set up for      SUZAKU
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
Setting...
 Image  keywords   = X          Y           with binning =    8
 WMAP   keywords   = X          Y           with binning =    8
 Energy keyword   = PI                     with binning =    1
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   8.0000
MJDREF =  5.1544000742870E+04 with TIMESYS = TT
 Number of files read in:  1
remove =    0
datdir = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/!
filenm = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_obslist.def!
remove =    0
datdir = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/!
filenm = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_sort.tmp!
#!/bin/sh
CMDNAME=ffilecat
ffilecat infile="@/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_obscat.tmp" outfile=/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_read_cat.xsl keywords="@/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_obslist.def" maxlen = 11 minlen = 0 aform = A11 iform = I8 eform = "E8.2" quiet = yes omit = no 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
CMDNAME=fmemsort
fmemsort infile=/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_read_cat.xsl outfile=/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_sort.tmp columns="DATE-OBS TIME-OBS" method="shell" ascend=yes load2mem=yes copyall=yes unique=no history=yes clobber=yes 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
CMDNAME=mv
mv -f /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_sort.tmp /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_read_cat.xsl 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  "infile=@/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_obscat.tmp" "outfile=/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_read_cat.xsl" "keywords=@/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_obslist.def" maxlen = 11 minlen = 0 aform = A11 iform = I8 eform = "E8.2" quiet = yes omit = no
  "infile=/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_read_cat.xsl" "outfile=/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_sort.tmp" "columns=DATE-OBS TIME-OBS" method=shell ascend=yes load2mem=yes copyall=yes unique=no history=yes clobber=yes
 
******************** Observation Catalogue ********************
 
Data Directory is: /home/ozaki/tmp/mkNeDe/
HK Directory is: /home/ozaki/tmp/mkNeDe/
#!/bin/sh
fdump /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_read_cat.xsl STDOUT @xsel_display.def - prhead = no pagewidth = 128 wrap = yes showunit = no tdisp = yes
  "/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_read_cat.xsl" STDOUT "@xsel_display.def" "-" prhead = no pagewidth = 128 wrap = yes showunit = no tdisp = yes
 
 
        OBJECT      DATE-OBS    TIME-OBS    DATE-END    TIME-END    EDITMODE
      1 Fornax Clus 2005-09-13T NOT_FOUND   2005-09-14T NOT_FOUND   3x3
 
!xsel:SUZAKU-XIS0-STANDARD >
!xsel:SUZAKU-XIS0-STANDARD > clear hk
!xsel:SUZAKU-XIS0-STANDARD > read hk
!> HK file directory >[./] ./
!> Enter HK file list >[ae100020010xi0_0.hk.gz] ae100020010.hk.gz
remove =    0
datdir = ./!
filenm = ./ae100020010.hk.gz!
!> Are the HK files in expanded form? >[yes] yes
!xsel:SUZAKU-XIS0-STANDARD > select hk "AOCU_HK_CNT3_NML_P==1"
#!/bin/sh
CMDNAME=maketime
maketime infile=./ae100020010.hk.gz outfile = /san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl expr = "AOCU_HK_CNT3_NML_P==1" name = NAME value = VALUE time = TIME start = START stop = STOP  compact = no histkw = yes 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  "infile=./ae100020010.hk.gz" outfile = "/san_xray/astroe2/home/ozaki/tmp/mkNeDe/xsel_hksel_out.xsl" expr = "AOCU_HK_CNT3_NML_P==1" name = NAME value = VALUE time = TIME start = START stop = STOP compact = no histkw = yes
PREFR keyword not found, using prefr = 0.5
POSTFR keyword not found, using postfr = 0.5
!xsel:SUZAKU-XIS0-STANDARD > bin event
#!/bin/sh
CMDNAME=extractor
extractor filename = "@xsel_files.tmp[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = xsel_out_event.xsl copyall=no regionfile = "NONE" qdpfile = NONE fitsbinlc = "NONE"  unbinlc = NONE phafile = NONE imgfile = NONE timefile = "@xsel_timefile.asc" gstring = "NONE" timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin =    1 binh =    8 binf =    8 binlc =  1.6000000E+01 tcol = TIME ecol = PI ccol = SEGMENT gcol = 		  GRADE gti = "STDGTI" events = "EVENTS" gtitxt = xsel_ascii_out.xsl timeref =   40000.00 wtmapb = yes wtmapfix = no wmapver = 2 gtinam = "GTI" exitnow = no 2> /tmp/$$xsel_error.tmp
err_return=$?
err_file=`cat /tmp/$$xsel_error.tmp| grep -v ld.so | wc -l `
if [ $err_file -ne 0 -o $err_return -ne 0 ]
       then
           cat /tmp/$$xsel_error.tmp
           rm -f /tmp/$$xsel_error.tmp
           exit 1
fi
rm -f /tmp/$$xsel_error.tmp
exit 0
  filename = "@xsel_files.tmp[PI=     0:  4095, GRADE=0:0 2:4 6:6 STATUS=0:262143]" eventsout = "xsel_out_event.xsl" copyall=no regionfile = NONE qdpfile = NONE fitsbinlc = NONE unbinlc = NONE phafile = NONE imgfile = NONE timefile = "@xsel_timefile.asc" gstring = NONE timeorder = no xcolf = X ycolf = Y xcolh = X ycolh = Y xfkey = TLMAX yfkey = TLMAX xhkey = TLMAX yhkey = TLMAX phamax = TLMAX specbin = 1 binh = 8 binf = 8 binlc = "1.6000000E+01" tcol = TIME ecol = PI ccol = SEGMENT gcol = GRADE gti = STDGTI events = EVENTS gtitxt = "xsel_ascii_out.xsl" timeref = "40000.00" wtmapb = yes wtmapfix = no wmapver = 2 gtinam = GTI exitnow = no
extractor v4.67     11 Jul 2006
 Getting FITS WCS Keywords
 Doing file: /home/ozaki/tmp/mkNeDe/tmp2.evt
          Total      Good    Bad: Region      Time     Phase     Grade     Cut
         176201    176201              0         0         0         0         0
 Writing events file
 176201 events written to the output file
===============================================================================   Grand Total      Good   Bad:  Region      Time     Phase     Grade    Cut
        176201    176201              0         0         0         0         0   in  28587.     seconds
!xsel:SUZAKU-XIS0-STANDARD > save event ae100020010xi0_0_3x3n000a_de.evt clobber=yes
Wrote events list to file ae100020010xi0_0_3x3n000a_de.evt
!> Use filtered events as input data file ? >[no] no
!xsel:SUZAKU-XIS0-STANDARD > exit
!> Save this session? >[no] no
#!/bin/sh
/bin/rm -f xsel_*work*.xsl
/bin/rm -f xsel_*mer*.xsl
/bin/rm -f xsel_*.xsl
/bin/rm -f xsel_*.def
/bin/rm -f xsel_*.tmp
exit 0
#!/bin/sh
pset fdump.par infile=" " columns="-"